Dorsal based orthosis leaves palm free for function. Made of thin molded Kydex, lined in soft felt for comfort. Soft finger straps fasten easily and permit each finger to be individually aligned for maximum control. Able to bend palmar bar to conform to hand for secure hold. To size, measure width across 2nd to 5th MP (large knuckles).
The 3pp ThumSling NP thumb brace provides a moderate level of support to the carpometacarpal (CMC) joint assisting to reduce pain from arthritis or tendinitis.
Actimove® Manus Forte Plus is a highly breathable, stabilising wrist and thumb brace. Two rigid anatomically preformed and individually mouldable aluminium splints on the volar and medial side of the hand in combination with two plastic stays on the dorsal side of the hand provide a perfect anatomical fit, effective support of the wrist and reliable stabilisation of the thumb in neutral position.
Provide wrist and 1st metacarpal control. Low profile elasticised support made from a durable and lightweight cotton/lycra mix. It features an aluminium palmar stay to allow for contouring for individual patients. For sizing measure wrist circumference.
The BioSkin Thumb Spica is a slim, low-profile brace designed to immobilise the thumb while still allowing full use of the other fingers. It is constructed from BioSkin's hypoallergenic, breathable, and soft material so it can be comfortably worn for hours at a time. A rigid, yet customizable, aluminium stay runs along the thumb to provide support and immobilisation. The brace then wraps around the wrist, providing compression to reduce pain and enhance recovery. It can be worn on either your left or right hand and comes in two different sizes.
The BioSkin Wrist Thumb Spica helps ease the pain and speed recovery of many wrist and thumb injuries. BioSkin has designed the brace to be lightweight and comfortable while providing the necessary support to injured wrist and thumb joints. Ultra-soft micro-fleece is placed against the skin and a customizable, aluminium stay is used along the CMC and MP joints for immobilisation.
CMC thumb wraparound with the addition of a firm, mouldable insert inside the thumb strap. Thumb strap helps to abduct and stabilise the first metacarpal and open the thumb web space.
Comfort Cool Thumb CMC Restriction Splint is specifically designed for osteoarthritis and medial subluxation of the thumb CMC joint. This splint supports the thumb CMC joint while allowing full hand function.
Comfortprene helps keep the skin dry. Circumferential design with D-ring strap closure under a double layer of stockinette makes this splint easy to put on and comfortable to wear.
Gladiator Wrist and Thumb Orthosis is designed to provide complete and adjustable immobilization making this ideal option for sprains, injuries and postsurgical distal radius fractures. Made of perforated Ariaprene®, a breathable eco-friendly alternative to neoprene. This unique material provides the perfect. Designed with four removable, bendable aluminium stays for a customized fit. Anatomical design allows full finger function. Soft anti-microbial liner wicks sweat away. To size, measure wrist circumference.
Extra long wrist and thumb support with removable, mouldable 2.4mm thick thermoplastic stay provides a customized fit. Thin, 1.6mm, perforated neoprene provides cool, lightweight support and compression.
Mid length wrist and thumb support with removable, mouldable 2.4mm thick thermoplastic stay provides a customized fit. Splint length measures 18 to 20cm, depending on size.
Short length wrist and thumb support with removable, mouldable 2.4mm thick thermoplastic stay provides a customized fit. Thin, 1.6mm, perforated neoprene provides cool, lightweight support and compression.
This extended version of the wraparound thumb splint supports the wrist. Ideal for carpal tunnel, deQuervain's, joint instabilities, and post-surgical repair.
Neoprene support allows fingers to move for functional use, while maintaining neutral alignment of the MP joints in rheumatoid arthritis.
Measure width at the MP joints for size.
The Formfit Thumb Spica is designed to restrict wrist and thumb motion. It provides immobilisation and protection for patients suffering from tendonitis , select soft tissue injuries as well as for post-cast healing.
Help relieve night time hand and wrist pain. Cushioning beads provide comfort and protection. Designed to promote a neutral wrist and hand position for support and comfort during sleep.
To provide stable wrist and finger positioning. Lightweight, durable Kydex construction can be heat moulded to customise. It features an adjustable palmar stay and adjustable web space abduction with foam roll. For sizing, measure width of the palm.
To provide stable wrist and finger positioning. Lightweight, durable Kydex construction can be heat moulded to customise. It features an adjustable palmar stay, and adjustable web space abduction with foam roll. For sizing, measure diameter of the palm.
Supports the fingers, thumb and wrist in a functional resting position. Malleable aluminium frame with a special self-wicking cover that helps control perspiration dampness.
Soft, padded thumb and wrist support is comfortable and lightweight. Made of Velfoam padding with a self-wicking lining and aluminum stays. Use in the treatment of repetitive motion disorders, De Quervain’s, tenosynovitis, arthritis and thumb fractures. Contoured stay fits the proximal phalanx, thenar eminence and radial side of the wrist. Stay can be bent by hand for a custom fit.
The CMC-X Thumb Stabilizer provides your patients with pain relief from carpometacarpal (CMC) joint arthritis while allowing them to continue the activities they enjoy.
Wraparound thumb piece allows custom sizing. Made of 3.2mm neoloop with a hook closure. Provides flexible support for painful wrist and thumb conditions, repetitive strain injury and arthritis. Soft material stretches and conforms for comfort. Fully adjustable thumb wrap can be trimmed for a custom fit. One adjustable size fits most hands.
The Norco D-Ring Wrist and Thumb Orthosis is ideal for cumulative trauma injuries, de Quervain’s and tendinitis. Helps decrease pain and inflammation in the wrist and thumb due to arthritis, sprains, strains, joint instabilities, and post-surgical repair.
Protect palms and allow finger movement. This exceptionally soft palm protector allows free finger movement while helping to prevent finger contractures and skin breakdown in the palm.
The OPED Pollex Pro Thumb Brace immobilises the base and saddle joints of the thumb perfectly. A rigid shell reinforcement between the thumb and the index finger keeps the thumb joint relatively immobile.
Classic thumb support in a flexible material. The material is put diagonally to achieve best support and fit. A flexible coil springs provides functional support.
The Ottobock Manu Arexa Pollex supports and stabilises with anatomically pre-shaped splints and a coil spring for the thumb. Can be put on with one hand thanks to the Pull-2-Go closure.
The Ottobock 50P22 Rhizo Arexa thumb brace stabilises the thumb joint using two individually formable aluminium splints. They run along the side of the thumb without exerting pressure on the back of the thumb.
Manufactured in Lycrafleece material. Flexible splint to support thumb and provide greater comfort with thumb movement. Measure wrist circumference for sizing.
Whilst providing full finger function, this very low profile wrap-around support provides adjustable support for the thumb CMC joint in the treatment of osteoarthritis and medial subluxation.
Made from a breathable high compression material with microfleece lining. Easy ‘slip-on’ design with D-ring closure straps. Supplied with medium stability plastic palmar support which can be heat moulded. Semiflexible stay provides thumb abduction and support to CMC and MCP joints. Measure wrist circumference for sizing.
Shorter length, thumb spica splint. Features removable radial, palmar, and dorsal stays. Liner wicks moisture away from the skin. Memory foam padding in the palm and around the base of thumb enhances comfort and support. Suitable for the use in the treatment of DeQuervain's Tendonitis; Gamekeeper's Thumb; selected scaphoid injuries.
Now available in Beige or Black. The Med Spec Ryno Lacer is a combination wrist and thumb support constructed from perforated suede and lined with polypropylene felt.
Circumferential brace with two closing tabs attached to lacing on the ulnar side of the wrist. Features a thumb section added for increased thumb support and stability.
Thermoskin Thermal Adjustable Thumb Brace supports the CMC joint and reduces the affects of thumb hyperextension to relieve thumb pain. Adjustable aluminium stay. Universal fit.
Thermoskin Mouldable Thermal Thumb Splint, previously known as Thermoskin Flexible Thumb Splint with mouldable support. A semi rigid support for UCL injuries associated with ball sports, skiing and work related injuries. For sizing, measure around wrist joint.
Features 1/8” thick neoprene with nylon lining and an anatomically-contoured aluminium thumb splint for immobilisation of the thumb. Closed cell neoprene increases blood circulation, for compressive and proprioceptive effect.
This ready-to-wear orthosis is recommended for those who need the support of a Short or Long Opponens splint. Easily applied with two stretch velcro straps, it features a malleable aluminium thumb splint which can be adjusted for a custom fit.
Provides support to the thumb, wrist and hand, the Universal Wrist Hand Orthoses comes with a removable aluminum upright on the palmer side which is malleable for a custom fit.
Introducing the Plastalume Metacarpal Splint, an aluminum splint designed for comfortable immobilization of the hand, wrist, and forearm. Crafted with patient comfort in mind, the latex-free 1/4" foam padding eliminates bulky dressing, ensuring a superior user experience.
S.O.T (Smart Orthotic Treatment) is a resting splint for the spastic and paretic hand when the goal is to maintain or increase the mobility of the hand.